Cleaning and Storage Instructions

In this article:

Proper maintenance and storage of your Ongo Vision device are essential for ensuring optimal performance and longevity. This article will provide you with step-by-step instructions on how to clean and store your device correctly.

Cleaning the Ongo Vision Device

Before cleaning, ensure that the device is turned off and disconnected from any power source.
Use a soft, dry, and lint-free cloth to gently wipe the exterior of the device, removing any dust or debris. Avoid using abrasive materials that may scratch the surface.
If necessary, you may use a slightly damp cloth to remove stubborn dirt or stains. However, be sure to wring out the cloth thoroughly to prevent any moisture from entering the device.
Pay special attention to the lens cover. Clean it gently with a non-scratching optical-grade cloth. Do not apply excessive pressure, as this may damage the lens.
Allow the device to air dry completely before storing or using it again.

Caution: Do not use any cleaning agents, solvents, or sprays on the Ongo Vision device, as these may damage the components or compromise the device's functionality.

Cleaning the Heated Stage

Ensure that the device is turned off and the heated stage has cooled down to room temperature.
Use a soft, dry cloth to wipe the surface of the heated stage, removing any residue or debris from previous samples.
If needed, you may use a slightly damp cloth to clean the stage. However, be cautious not to allow any moisture to enter the device through the stage opening.
Allow the heated stage to dry completely before using the device again.

Storing the Ongo Vision Device

When not in use, always store the Ongo Vision device in its provided protective case with the foam inserts. This will shield the device from dust, scratches, and other potential damage during storage or transportation.
Ensure that the device is completely dry before placing it in the storage case.
Store the device in a cool, dry place away from direct sunlight, extreme temperatures, and high humidity. The recommended storage temperature range is between 0°C and 50°C (32°F to 122°F).
If you plan to store the device for an extended period, it is advisable to charge the battery to approximately 50% capacity before storage. This helps maintain the battery's health and prolongs its lifespan.
Avoid storing the device near strong magnetic fields or in areas prone to vibrations, as this may cause damage to the internal components.

By following these cleaning and storage guidelines, you can ensure that your Ongo Vision device remains in optimal condition, providing accurate and reliable semen analysis results for years to come.

If you have any further questions or concerns about maintaining your Ongo Vision device, please consult our Troubleshooting Guide or contact our Customer Support team for assistance.