Safety Precautions and Warnings

The Ongo Vision microscope is designed with user safety in mind. However, to ensure the safe operation of the device and to prevent potential hazards, it is essential to follow the safety precautions and warnings outlined in this article.

Electrical Safety

1. Only use the power adapter and cables provided or recommended by Ongo Vettech. Using unauthorized or incompatible accessories may result in electrical hazards or damage to the device.
2. Do not attempt to modify, disassemble, or repair the Ongo Vision microscope or its accessories. Any unauthorized modifications may compromise the device's safety features and void the warranty.
3. Keep the device and its accessories away from water and other liquids. If the device becomes wet, immediately disconnect it from the power source and contact Customer Support for assistance.
4. Do not use the Ongo Vision microscope in environments with high humidity, dust, or extreme temperatures, as these conditions may affect the device's electrical safety and performance.

Optical Safety

1. The Ongo Vision microscope uses a powerful LED light source. Do not stare directly into the light or point it towards the eyes of humans or animals, as this may cause temporary or permanent eye damage.
2. Do not attempt to remove or replace the LED light source. If the light appears to be malfunctioning, contact Customer Support for assistance.

Biological Safety

1. Always wear appropriate personal protective equipment (PPE), such as gloves and lab coats, when handling semen samples to minimize the risk of exposure to potentially harmful biological materials.
2. Dispose of used slides, pipettes, and other consumables in accordance with your local biosafety regulations and guidelines.
3. Clean and disinfect the Ongo Vision microscope and its accessories regularly, following the instructions provided in the Cleaning and Storage article.

Heated Stage Safety

1. The heated stage of the Ongo Vision microscope can reach temperatures of up to 37-38°C (98.6-100.4°F) to maintain optimal conditions for semen analysis. Avoid touching the heated stage directly during or immediately after use to prevent burns.
2. Do not place flammable or heat-sensitive materials near the heated stage, as this may create a fire hazard.

General Safety

1. Use the Ongo Vision microscope only for its intended purpose, as described in the Intended Use Disclaimer.
2. Do not attempt to use the device if it appears to be damaged or malfunctioning. Contact Customer Support for assistance.
3. Store the Ongo Vision microscope and its accessories in a safe, dry place when not in use, as described in the Cleaning and Storage article.
4. Keep the device and its accessories out of reach of children and unauthorized personnel to prevent accidental damage or misuse.

By adhering to these safety precautions and warnings, you can ensure the safe and proper use of the Ongo Vision microscope.